2018 MRS Spring Meeting - Tagged with Composition & Microstructure - Surface Techniques>Scanning Electron Microscopy (Sem)

CM05.01.05 : Precursor Dislocation Avalanches in Small Crystals—The Irreversibility Transition

11:45 AM–12:00 PM Apr 3, 2018

PCC North, 100 Level, Room 132 B

Haolu Jane ZhangPhD Student atCalifornia Institute of Technology

CM05.04.06 : XRD Evaluation of Lattice Strain in Concentrated Alloys

4:00 PM–4:15 PM Apr 4, 2018

PCC North, 100 Level, Room 132 B

Rameshwari NaoremGraduate Student atIndian Institute of Technology Kanpur

CM06.02.01 : Atomic-Scale Characterization of Thermoelectric Oxides Using High Spatial and Energy Resolution STEM-EELS

1:30 PM–2:00 PM Apr 3, 2018

PCC North, 100 Level, Room 132 C

Demie KepaptsoglouSenior Research Fellow atSuperSTEM

EN02.12.06 : Blade-Coating High Efficiency Perovskite Solar Cells in Ambient by Using Lead Acetate Trihydrate as Lead Source

5:00 PM–7:00 PM Apr 5, 2018

PCC North, 300 Level, Exhibit Hall C-E

Weiguang Kong

EN02.12.39 : Effect of Zinc Oxide Pre-Annealing on Formation of Perovskite Thin Films for Stable Perovskite Solar Cells

5:00 PM–7:00 PM Apr 5, 2018

PCC North, 300 Level, Exhibit Hall C-E

Young Wook NohGraduate Student atKyung Hee University

EN05.03.09 : Single-Mode Microwave Processing of Hybrid Ceramic Composites

5:00 PM–7:00 PM Apr 3, 2018

PCC North, 300 Level, Exhibit Hall C-E

Selva Vennila RajuSenior Researcher atOakRidge Associate Universities(ORAU), Belcamp

EN06.04.04 : Atomic-Scale Control of Silicon Expansion Space as Ultrastable Battery Anodes

5:00 PM–7:00 PM Apr 3, 2018

PCC North, 300 Level, Exhibit Hall C-E

Jian ZhuHunan University

EN07.06.08 : Morphology and Oxidation of Stoichiometric UO2 Powders Following Aging in Controlled Relative Humidity

11:00 AM–11:15 AM Apr 5, 2018

PCC North, 100 Level, Room 126 C

Zurong DaiStaff Scientist atLawrence Livermore National Lab

EN10.13.31 : 120 MeV Au9+ Ion Induced Modifications of Template Synthesized PbSe Nanowires for Thermoelectric Applications

5:00 PM–7:00 PM Apr 5, 2018

PCC North, 300 Level, Exhibit Hall C-E

Rashi GuptaGuruGobind Singh Indraprastha University

EN14.14.11 : Understanding of Liquid-Solid Interfaces for Sodium and b″-Alumina Solid-State Electrolyte in Low Cost, Safe and Long-Cycle Life Sodium-Metal Halide Batteries

11:30 AM–11:45 AM Apr 6, 2018

PCC North, 100 Level, Room 122 B

Guosheng LiScientist atPacific Northwest National Laboratory

EN17.08.08 : Disc Irradiation for Separate Effects Testing with Control of Temperature (DISECT)

10:30 AM–10:45 AM Apr 6, 2018

PCC North, 100 Level, Room 121 A

Walter WilliamsIdaho National Laboratory

EN18.09.01 : Silicon Photocathode for Selective CO2 Reduction to Hydrocarbons and Oxygenates

8:00 AM–8:15 AM Apr 5, 2018

PCC North, 100 Level, Room 123

Gurudayal GurudayalPostdoc atLawrence Berkeley National Laboratory

EN19.10.05 : Highly Efficient Solar-Driven CO2 Reduction to Hydrocarbons and Oxygenates

9:30 AM–9:45 AM Apr 5, 2018

PCC North, 100 Level, Room 124 B

Gurudayal GurudayalPostdoc atLawrence Berkeley National Laboratory

EP02.04.23 : Emission and Structure of Er Doped Si Rich HfO2 Nanocrystals

5:00 PM–7:00 PM Apr 3, 2018

PCC North, 300 Level, Exhibit Hall C-E

Brahim el FilaliUPIITA-IPN

EP08.10.11 : WITHDRAWN 1/29/18 (EP08.10) Electrical Characterization of Al/ATSP/p-Si Device for Photodiode Applications

5:00 PM–7:00 PM Apr 5, 2018

PCC North, 300 Level, Exhibit Hall C-E

Mete BakirUniversity of Illinois

MA04.04.05 : Mechanical and Microstructural Characterization of Laminated Steel Structures Made via Ultrasonic Additive Manufacturing

9:00 AM–9:15 AM Apr 4, 2018

PCC West, 100 Level, Room 106 A

Tianyang HanGraduate Research Associate atThe Ohio State University

MA04.05.04 : Selective Laser Melted (SLM) Ti6Al4V Alloy for Biomedical Implants

10:45 AM–11:00 AM Apr 4, 2018

PCC West, 100 Level, Room 106 A

Avik SarkerPhD Research Student atRMIT University

MA04.11.12 : Fabrication of Pressure/Strain/Temperature Sensors Based on MWCNTs/BaTiO3/PVDF Nanocomposites Using Fused Deposition Modeling 3D Printing Technology

5:00 PM–7:00 PM Apr 5, 2018

PCC North, 300 Level, Exhibit Hall C-E

Hoejin KimDoctoral Student atThe University of Texas at El Paso

MA04.11.20 : WITHDRAWN 1/29/18 (MA04.11) Effects of Process Parameters on the Surface Integrity of TiC Thin Film Produced by RF Magnetron Sputtering

5:00 PM–7:00 PM Apr 5, 2018

PCC North, 300 Level, Exhibit Hall C-E

Oluseyi OladijoBotswana international University of Science and Technology

NM01.03.04 : Emission and Structural Properties of ZnO:Er Nanocrystals Prepared by Spray Pyrolysis

5:00 PM–7:00 PM Apr 3, 2018

PCC North, 300 Level, Exhibit Hall C-E

Jose Luis Casas EspinolaInstituto Politecnico Nacional